Cellular through remote control switch

Cellular through remote control switch Seminar Topics, Abstracts, Free Reports, PPT, IEEE Presentation, Documentation, PDF and DOC downloads for ECE/CSE/IT Students

Cellular through remote control switch implies control of devices at a remote location via circuit interfaced to the remote telephone line/device by dialing specific DTMF (dual tune multi frequency) digits from a local telephone. This project Cellular through remote control switch has the following features

1. It can control multiple load (on/off/status each load)
2. It provides you feedback when the circuit is in energized state and also sends an acknowledgement indicating action with respect to the switching on of each load and switching off of all loads (together).

It can selectively switch on any one or more loads one after the other and switch off all loads simultaneously

OPERATION

1. Dial the Phone Number - a OK tone produced
2. Password - 4321
3. Load number - 1, 2, 3, 4
4. Control number - 9/on, O/off, # / status

Then the password is entered. The password is 123451 Then to check the status of the corresponding load enter # and load number. To on the load enter 9 and load number. To off the load enter 0 and load number. The whole operation is done within 3 minutes. After 3 minutes the operation is timeout.

Related Links

IEEE Seminar Topics Electrical Engineering

Latest Seminar Topics for Electrical Engineering 2013(new)

Energy Science & Engineering Seminar Topics for EEE (new)

Electrical Engineering Mini Projects 2013(new)

Electrical Engineering Projects

Electrical Engineering Students can also copy  Presentation From

Electronics & Communication Engineering 

Applied Electronics & Instrumentation Engineering